Secure Mobile Access 10.2 Deployment Guide

Connecting the SMA to the Gateway

To connect the SMA using Scenario B

  1. Connect one end of an Ethernet cable to your DMZ, either directly to the corresponding port on your existing SonicWall gateway appliance, to a hub, or to a switch on your DMZ.
  2. Connect the other end of the Ethernet cable to the X0 port on your SonicWall SMA 210/410. The X0 Port LED lights up indicating an active connection.
  3. Configure the SMA X0 with an IP address in the DMZ subnet. Refer to Configuring the X0 IP Address for more information.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.