Secure Mobile Access 10.2 Deployment Guide

Adding a NetExtender Client Route

NetExtender allows remote clients to have seamless access to resources on your local network.

To configure a NetExtender client route

  1. Using Secure Mobile Access, navigate to the Clients > Routes page.

  2. To force all SMA client traffic to pass through the NetExtender tunnel, select Enabled in the Tunnel All Mode drop-down menu.
  3. Click Add Client Route.

  4. Enter the network address of the trusted network to which you would like to provide access with NetExtender in the Destination Network field. For example, if you are connecting to an existing DMZ on the 10.1.1.0/24 subnet and you want to provide access to your LAN network on the 192.168.168.0/24 subnet, you would enter 192.168.168.0.
  5. Enter the subnet mask of the destination network in the Subnet Mask field. Continuing the example, enter 255.255.255.0.
  6. Click Submit to finish adding this client route.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.