Secure Mobile Access 100 10.2 Administration Guide

Adding a Policy for an IPv6 Address

To add a policy for an IPv6 address

  1. Navigate to Users > Local Users.
  2. Click the Configure icon next to the user you want to configure.
  3. Select the Policies page.
  4. Click Add Policy...
  5. In the Apply Policy To field, click the IPv6 Address option.
  6. Define a name for the policy in the Policy Name field.
  7. Type an IPv6 address in the IPv6 Address field in the form 2001::1:2:3:4.
  8. In the Port Range/Port Number field, optionally enter a port range or an individual port.
  9. In the Service drop-down menu, click on a service object.
  10. In the Status drop-down menu, click on an access action, either Allow or Deny.
  11. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.