Secure Mobile Access 100 10.2 Administration Guide

Adding a Policy for an IPv6 Network

To add a policy for an IPv6 Network

  1. In the Apply Policy To field, click the IPv6 Network option.
  2. Define a name for the policy in the Policy Name field.
  3. Type a starting IPv6 address in the IPv6 Network Address field.
  4. Type a prefix value in the IPv6 Prefix field, such as 64 or 112.
  5. In the Port Range/Port Number field, optionally enter a port range or an individual port.
  6. In the Service drop-down menu, select a service option.
  7. In the Status drop-down menu, select an access action, either Allow or Deny.
  8. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.