Secure Mobile Access 100 10.2 Administration Guide

Adding a Policy for All IPv6 Addresses

To add a policy for all IPv6 addresses

  1. In the Apply Policy To field, select the All IPv6 Address option.
  2. Define a name for the policy in the Policy Name field.
  3. The IPv6 Address Range field is read-only, specifying all IPv6 addresses.
  4. In the Service drop-down menu, click on a service option.
  5. In the Status drop-down menu, click on an access action, either Allow or Deny.
  6. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.