Secure Mobile Access 100 10.2 Administration Guide

Denying Mobile App Binding when Login is Attempted from any External Network

If an administrator has enabled Mobile App for Time-based One Time Password (TOTP) Two Factor Authentication and has specified networks such as corporate network to bind the mobile App during Virtual Office login, users see the mobile-binding QR code only when login is attempted from any of the networks specified by the administrator.

To specify the networks to which users should be connected to bind their mobile app during login

  1. Log in to the management interface of the SMA appliance and navigate to Users > Local Users.
  2. Hover over a user and click the Edit icon.
  3. Click the Login Policies tab and enable One-Time Password.
  4. Enable Use Mobile App.

  5. In the Allow Bind Network box, specify the IP address of the network that the user should be connected to so that the user can see the QR code to bind the mobile application during login.

    You can specify multiple networks in the Allow Bind Network box using ‘;’ as a separator between network IP addresses. If you specify multiple networks, the user should be connected to any one of the specified networks to complete mobile app binding.

    If you leave the Allow Bind Network box blank, the mobile app can be bound when login to Virtual Office is attempted from any network.

  6. Click Submit.

If login is attempted from any network that is not one among the networks specified in Allow Bind Network, the user does not see the QR code to bind the mobile app.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.