Secure Mobile Access 100 10.2 Administration Guide

General Settings

To configure Virtual Assist general settings

  1. Navigate to the Users > Local Users > Edit Local User page and select the Capture tab. The Edit Local Users page displays.
  2. From the General Settings Enable Capture ATP service drop-down menu, select one of the following:

    • Use group setting – Take the action specified by the group setting.
    • Enabled – Enable this action for the user. Overrides the group setting.
    • Disabled – Disable this action for all members of the group. Overrides the global setting.
  3. Click ACCEPT to save settings.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.