Secure Mobile Access 100 10.2 Administration Guide

Uploading New Firmware

To upload new firmware

  1. Log in to MySonicWall.
  2. Download the latest Secure Mobile Access firmware version.
  3. In the Secure Mobile Access management interface, navigate to the System > Settings page.
  4. Click Upload New Firmware under the Firmware Management section.
  5. Click Browse.
  6. Select the downloaded Secure Mobile Access firmware. It should have a .sig file extension.
  7. Click Open.
  8. Click Accept. Wait for the firmware to upload and be written to the disk.
  9. The System > Settings page displays the firmware table, with the uploaded firmware listed in it. Click the Boot icon in the Uploaded Firmware row to boot the new firmware with existing settings.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.