Secure Mobile Access 100 10.2 Administration Guide

Booting a Firmware Image

You can boot up (restart) the appliance with any firmware image that appears in the Firmware Management table on the System > Settings page. You have the choice of keeping current configuration settings or reverting to factory default settings.

To boot a firmware image

  1. Click the boot icon in the row for the Firmware Image version that you want to run on the SMA appliance.
  2. To reboot the image with factory default settings, select Boot with factory default settings. If this option is not selected, current configuration settings are kept.
  3. The pop-up message is displayed: Are you sure you wish to boot this firmware? Click OK.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.