Secure Mobile Access 100 10.2 Administration Guide

Configuring Network Monitoring Addresses

In the Network Monitoring Address section, you can configure monitoring of the LAN and WAN IP addresses. When Network Monitoring is configured, if the LAN or WAN connection is lost on the active unit but is reachable on the idle unit, failover occurs, and the idle unit takes the active role.

When configured, the LAN and WAN connection status is detected and displayed in the High Availability Status section at the top of the page.

To configure network monitoring

  1. On the High Availability > Settings page under Network Monitoring Address, type the LAN IP address in the LAN Monitoring Address field.
  2. Type the WAN IP address in the WAN Monitoring Address field.
  3. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.