Secure Mobile Access 100 10.2 Administration Guide

File Size Settings

To configure file size settings

  1. Navigate to the Capture ATP > Settings page.

  2. To specify the maximum size of the file that is sent to Capture ATP service, enter a value in the Maximum size for a file window. Valid maximum size is 0 – 100 MB for user level and group level, and 1 – 100 MB for global level.

    • If the value is set to 0 at user level, SMA uses the maximum file size of the group setting.
    • If the value is set to 0 at group level, SMA uses the maximum file size of the global setting.
    • If the value is set to 0 at global level, the file is not sent to Capture ATP service to check.
    • If a file size is less than the maximum value, the file is sent to Capture ATP service to check.
  3. Select Don’t send the file to backend server if the file size exceeds the size limitation if you do not want to send the exceeding file to the backend server.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.