Managing SonicWall Switch with CSC-MA


Before configuring and managing the switch from CSC-MA, the following prerequisites should be met.

  • You need a MySonicWall account.
  • The switch needs to be installed and connected to a licensed firewall so it can be acquired through Zero Touch configuration, and you need a CSC-MA license to manage the firewall and switch from CSC-MA.

Creating MSW Account

You need to have a valid MySonicWall account to use CSC-MA. A MySonicWall account is critical to receiving the full benefits from SonicWall security services, firmware updates, and technical support. MySonicWall is used to license your site and to activate or purchase licenses for other security services specific to your security solution.

To create a new MySonicWall account from any computer

  1. Navigate to
  2. In the login screen, click Sign Up.

  3. Enter your email address and choose a password that meets the security requirements.
  4. From the drop-down menu, select how you want to use two-factor authentication.
  5. Finish CAPTCHA and click on Continue to go the Company page.
  6. Fill your company information and click Continue.
  7. On the YOUR INFO page, complete the details and select your preferences.
  8. Click Continue to go to the EXTRAS page.
  9. Select whether you want to add additional contacts to be notified for contract renewals.
  10. To set up additional contacts:
    1. Input the First name.
    2. Input the Last name.
    3. Add the Email address for that person
    4. Click Add Contact.
  11. Select whether you want to add tax information.
  12. If providing tax information:
    1. In the Reseller for field, select the state from the drop-down menu.
    2. Add your Federal Tax ID.
    3. Add the Expiry (expiration) Date.
    4. Enter the Certificate ID.
    5. Click on ADD TAX ENTRY.
  13. Select whether you want to add your distributor information.
  14. To set up the distributor information:
    1. Input the Distributor Name.
    2. Input the Customer Number.
    3. Click Add Distributor.
  15. Click Finish.
  16. Check your email for a verification code and enter it in the Verification Code* field. If you did not receive a code, contact Customer Support by clicking on the support link.

Installing and Connecting the Switch

The switch is acquired through Zero Touch configuration. It needs to be connected to a properly licensed firewall and has to be enabled for Zero Touch in MSW. You also need a CSC-MA license and a to manage the switch from CSC-MA. For more detailed information about installing the switch, refer to the Switch Quick Start Guide.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.