Managing SonicWall Switch with CSC-MA

Introduction

You can use CSC-MA to manage SonicWall switches. This provides a single point of management so that you do not need to switch between devices. Once the switch is connected to a properly licensed firewall, it is automatically registered at MySonicWall (MSW). The switch options are then visible within CSC-MA. Your switch can be managed from device view on the individual firewall.

SonicWall switches are designed to connect SonicWall firewalls with access points and IP surveillance cameras, VOIP phones, and other PoE-Capable including other Ethernet-based networking equipment or computers. The Switch provides simple, yet powerful PoE manageability with features such as:

  • IEEE 802.3af or IEEE 802.3at/af ports
  • PoE port management
  • Port mirroring
  • Voice VLAN
  • QoS
  • Static routing
  • 802.1X authentication
  • Access point management.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.