Managing SonicWall Switch with CSC-MA


The Overview option displays all the available ports for the configured switches. The switch port configuration table displays the switch parameters as shown below:

You can configure a switch from the Overview command. Click the Add Switch button and follow the directions for "Adding Switches" in the Switch section.

To configure a port

  1. Navigate to MANAGE | SETUP > Switch Controller > Overview.
  2. Click the CONFIGURE icon for the port.

  3. Edit the fields needed in each section of the Port Configuration dialog. These include:
    • Basic Settings
    • Advanced Settings
    • 802.1X Settings
    • Storm Control Settings
    • Voice VLAN Settings
    • QOS Settings
  4. Click OK.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.