Capture Security Appliance Administration Guide

Static Route Configuration

Static routes can be defined for the CSa. This is necessary when both the LAN and the WAN interfaces are configured and the device might not know which interface it should use for routing.

Configuring Static Routes

To define the static routes for your configuration

  1. Click +Add New Route
  2. Define the IP addresses of the Destination Network, the Subnet Mask, and optionally, the Gateway.
  3. Click OK to save your settings.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.