These screens allow the configuration of the devices that can contribute files for testing. For each, Firewalls, API Connectors, and Email Security servers, dialog boxes support recall of scanning history, and configuration of new source devices.
For adding a single device, click +Add Firewall to open the Add New Firewall dialog. For multiple devices, click Import to open the Import Firewalls From File dialog.
For Firewalls, the additional allowed device is registered on MySonicWall, and its serial number and friendly name are added here.
To add firewalls in a High Availability pair to the allowed list, enter the serial numbers and friendly names of both units into the Firewalls list, with each unit on its own line.
Click +Add API Key to open the Add New API Connector dialog.
To add an API connector, the serial number and friendly name of the file source are added here and an API Key is generated.
For adding a single device, click +Add Email Security to open the Add New Email Security dialog. For multiple devices, click Import to open the Import Email Security Devices From File dialog.
Email security file sources are registered by friendly name and serial number at MySonicWall and connected as allowed devices to the CSa here.
Select the three-dotted menu (...) on the right of the device list to open the Edit Rate Limit dialog. You can also provide the rate limit when you add a new device.
Was This Article Helpful?
Help us to improve our support portal