SonicWall X Series Solution - Support for SonicWall Virtual Interfaces (VLANs)
03/26/2020 10 People found this article helpful 96,013 Views
SonicWall X-Series Solution - Support for SonicWall Virtual Interfaces (VLANs)
How to provision a X-Switch to support Virtual Interfaces on SonicWall?
Step 1: Check SonicWall firewall SonicOS version and upgrade if needed.
SonicWall X-Series Solution is only supported on SonicOS 220.127.116.11 or higher.
SonicWall X-Series Solution only supports SonicWall TZ series firewalls in SonicOS 18.104.22.168
Step 2: Preparing X-Switches for SonicWall integration:
- Configuring the X-Switch into factory default mode
- Configuring the X-Switch into manage mode
Note: A factory default X-Switch is recommended for the SonicWall X-Series Solution. It guarantees that the Dell X-Switch's configurations are in a well known state and can be managed from SonicOS.
If you wish or need to modify the X-Switch basic parameters such as the Management IP and Credentials, you need to use the X-Switch User Interface.
Note: You cannot modify the X-Switch's Management IP and Credentials from SonicOS
Was This Article Helpful?