SonicWall TZ Series and SonicWall X-Series solution managing SonicWall access points

03/26/2020 10 15958

DESCRIPTION:

SonicWall TZ Series and SonicWall X-Series solution managing SonicWall access points

RESOLUTION:

For information on other SonicWall X-Series Solution related topics:

KB185057 - How to provision X-Series Switches on a SonicWall TZ series firewall

KB186085 - How to provision X-Series Switches on a SonicWall TZ High Availability (HA) system

KB189771 - SonicWall X-Series Solution - Support for SonicWall Virtual Interfaces (VLANs)

KB185430 - SonicWall integration with X-Series Switches FAQ

KB185439 - SonicWall X-Series Solution Overview

KB185479 - How to manage X-Series switch's admin credentials and management IP through the X-Switch's UI

KB186709 - SonicWall X-Series Solution: Which models of X-Switches has support for POE+

KB189204 - SonicWall X- Series Solution  How to backup and restore X-Series switches

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SonicWall TZ Series and SonicWall X-Series solution manages SonicWall Access Points

Topics Covered:

1. SonicWall Access Point Series
2. Port Description
3. Power over Ethernet (POE) Injector
4. SonicWall TZ Series
5.  SonicWall X-Series solution
   • X-Series Switches
6. SonicWall TZ Series appliances
7. Setup the SonicWall for SonicWall access points
   • In the next two topics a TZ300 will be used in the example.
     • However the processs is the same for any TZ300-TZ600 products.
8. Connecting a SonicWall access point to a TZ300
9. Connecting a SonicWall access point to a SonicWall X-Series solution
10. TZ300 with SonicWall access point walk through

SonicWall Access Points

SonicWall Access Points Port Description

• There are two ethernet ports Lan1 and Lan2 and a Console Port.

Power over Ethernet (POE) Injector

• Locate "DATA IN" and cable to X2 port on the TZ appliance
• Locate "DATA & POWER OUT" and cable to LAN1/POE port on the SonicPoint
• A SonicPoint POE Injector is bundled in the SonicPoint ACe/ACi/N2 with POE Injector option

• TZ 300 and TZ300W
• TZ 400 and TZ400W
• TZ 500 and TZ500W
• TZ 600
• TZSOHOW

• Initialize TZ 300 with Setup Wizard. The Setup Wizard automatically assigns ports (X3,X4) to the X0 (LAN) portshield group. Port X2 is left undefined. Internet access is provided through the X1 (WAN) port.
• SonicWall manages SonicWall access points in the WLAN zone. SonicWall access points in the WLAN zone are auto detected and deployed.

To setup the SonicWall TZ for SonicWall Access Points:

• Assign port X2 to the WLAN zone.

• Assign a static IP address to port X2, for example you can assign a private static IP address of 172.16.31.1 to port X2. The SonicWall will automatically create a DHCP server on port X2 with a DHCP scope of (172.16.31.2 to 172.16.31.254)

Cabling a TZ300 to a SonicWall Access Points

• Locate the SonicPoint LAN1/POE port. Connect the LAN1 port to the supplied POE Injector "DATA & POWER OUT" port or POE capable network switch port (must be 802.3at compliant and capable of providing 25 watts).

• Locate the SonicWall WLAN (X2) port and connect to the POE network switch or POE Injector "DATA IN" port.

Connecting a SonicWall X-Series solution to a SonicWall Access Points

The SonicWall X-Series solution allows for the provisioning of X-Series switches on SonicWall firewalls as "Extended Switches". Ports on the "Extended Switch" can be PortShield to the WLAN zone of the SonicWall, to which we can connect SonicPoints access points. When connecting SonicPoint access points to a X-Series switch, it is important to consider the SonicPoint's power requirements. SonicWall access points requires a minimum of 25.5 watts. You must use a SonicWall power injector if your X-Series switch model does not support POE+.

• X1008P and X1018P does not support POE+, you must use a SonicPoint POE+ Power Injector (25.5watts or better) with these switches
• X1026P and X1052P does support POE+ but only on switch port 1 -12
• POE (Power Over Ethernet) provides up to15.4 watts
• POE+ (Power Over Ethernet Plus) provides 25.5 watts, POE+ is required by SonicWall access points

Here we have provisioned a X-Switch X1026P with ports 1 - 4 PortShield to the WLAN zone of the SonicWall, to which we have connected a SonicWall access point. Ports 1 -12 on the X1026P supports POE+ and can power SonicWallaccess points. 

For details on SonicWall X-Series Solution - Support for SonicWall Virtual Interfaces (VLANs) with SonicPoint example, see KB189771

For details about how to provision X-Series switches on SonicWall TZ series firewalls, see KB185057

For details about which models of  X-Series switches has support for POE+ (POE+ ports are required for SonicPoint ACe/ACi/N2) , see KB186709

Here the SonicWall  access point is connected through the X-Switch to the SonicWall. The access point has been auto detected and deployed.

TZ 300 managing a SonicWall Access Point walkthrough

• We have just initialized a SonicWallTZ 300 with the setup wizard
• Next we will configure the TZ 300 for a SonicWall Access Point

• Click the configure button for the X2 Unassigned port

• Here at network interfaces the X2 port is not assigned to any zone. 
  
• Assign the X2 port to the WLAN zone 

• Assign X2 the private IP address of 172.16.31.1

• In this example we will accept the other default settings and click okay 

• Here we have connected the SonicWall access point to the X2 WLAN port.  The access point has been auto detected and deployed.