SMA 100: Configure static IPs or IP ranges for specific users and groups

The IP addresses Pool can be configured globally, per user or per group.

In order to set the global IP range that the NetExtender clients will receive when they connect to the SSL VPN you need to go to Clients | Settings|Use Static Pool and specify the range inside "Client Address Range Begin" and "Client Address Range End" as in the example shown below.

If you need to configure a specific IP address for a particular user you can do it by going to Users|Local Users , edit the user settings.

Add the specific ip address for user under Clients .

When that particular user connects to the VPN, he/she will get assigned that specific IP address or range.

NOTE: In order for the user to appear inside the "Local Users" menu, this user must have been created locally or authenticated before as External Users.
Make also sure that the option "Delete external user accounts on logout" for that specific domain is not selected. You can check this by going to "Portals" > "Domains" and click on the "Configure" button for that particular domain.