Route traffic to certain website(s) through site to site VPN without Route All Traffic VPN set

03/26/2020 835 22047

DESCRIPTION:

Route traffic to certain website(s) through site to site VPN without Route All Traffic VPN setup.

RESOLUTION:

Feature/Application:

In existing site to site vpn tunnel setup between Head Office and Remote Office, there would be requirement that traffic to certain website from remote office might need to be routed through head office internet connection through the existing site to site vpn tunnel. However the requirement would not be to configure the site to site vpn tunnel in Route All Traffic through the vpn tunnel.

We can achieve the setup in few configuration modifications in existing vpn policy in the head office and remote office firewall.


Procedure:

Considering an existing site to site vpn tunnel is created and functional, following are the steps for additional configuration/modification that needs to be done to achieve the above setup.

In this knowledge article we will use google.com website ip address which is randomly taken. So in this example, we will route traffic from Remote Office for google.com website through Head Office firewall ISP.

Configuration in Remote Office Firewall:

Step 1: Create an address object for the website public ip as shown in the screenshot below. The address object will need to be in zone VPN.

 

Step 2: Create a new Address Group, include the address object we created in step 1 and also add the existing address object for the Head Office network(s). So this address group will consist remote network and the website(s) ip address.
 

Step 3: In the existing vpn policy to the Head Office, in the Network tab, for the Remote Network, select the Address Group created in Step 2.

Configuration in Head Office Firewall:

Step 1: Create an address object for the website(s)' public ip address as shown in the screenshot below. The address object will need to be in zone WAN.
 

Step 2: Create a new Address Group, include the address object we created in step 1 and also add the existing address object for the Remote Office network(s). So this address group will consist remote network and the website(s) ip address.
 

Resolution for SonicOS 6.5

This release includes significant user interface changes and many new features that are different from the SonicOS 6.2 and earlier firmware. The below resolution is for customers using SonicOS 6.5 firmware.

Feature/Application:

In existing site to site vpn tunnel setup between Head Office and Remote Office, there would be requirement that traffic to certain website from remote office might need to be routed through head office internet connection through the existing site to site vpn tunnel. However the requirement would not be to configure the site to site vpn tunnel in Route All Traffic through the vpn tunnel.

We can achieve the setup in few configuration modifications in existing vpn policy in the head office and remote office firewall.


Procedure:

Considering an existing site to site vpn tunnel is created and functional, following are the steps for additional configuration/modification that needs to be done to achieve the above setup.

In this knowledge article we will use google.com website ip address which is randomly taken. So in this example, we will route traffic from Remote Office for google.com website through Head Office firewall ISP.

Configuration in Remote Office Firewall:

Step 1: Go to Manage in the top navigation menu

              Select Objects |  Address Objects and add

Create an address object for the website public ip as shown in the screenshot below. The address object will need to be in zone VPN.

 

Step 2: Create a new Address Group. Go to Manage > Objects > address objects > address group and Add

 Step 3: Include the address object we created in step 1 and also add the existing address object for the Head Office network(s). So this address group will consist remote network and the website(s) ip address.
 

Step 3: In the existing vpn policy to the Head Office, in the Network tab, for the Remote Network, select the Address Group created in Step 2.

Go to Manage > VPN > Base settings,  edit the VPN in question on the pencil option

 Select Network Tab and on the Remote Network select the Address Group created in Step 2 as shown below:

Configuration in Head Office Firewall:

Step 1: Create an address object for the website(s)' public ip address as shown in the screenshot below. The address object will need to be in zone WAN.
 

Step 2: Create a new Address Group, include the address object we created in step 1 and also add the existing address object for the Remote Office network(s). So this address group will consist remote network and the website(s) ip address.
 

Step 4.: Configure NAT policy in the Head Office firewall to translate traffic coming from the Remote office network to WAN IP going to the website(s).