Modifying Address Object via SonicOS API call using cURL

12/28/2022 0 People found this article helpful 297,164 Views

Description

This article demonstrates how to modify address object via SonicOS API call using cURL tool

Resolution

Resolution for SonicOS 7.X

This release includes significant user interface changes and many new features that are different from the SonicOS 6.5 and earlier firmware. The below resolution is for customers using SonicOS 7.X firmware.

The following steps should be completed first to be able to use the API.

SonicOS API enabled on DEVICE| Settings | Administration| Audit/SonicOS API
"Enable RFC-2617 HTTP Basic Access authentication" option selected on the same page
A user created that is part of "SonicWall Administrators" group
HTTPS "User Login" option enabled on the respective interface, which will be used for API calls
An Address Object that already exist on the firewall. In this example the name of the Address Object is "AO-Test", which is a "host" type with an IP address of "10.10.10.10" and is part of the "LAN" zone.

In this use case we will create Address Objects and add them to a Address Group Object named "Blacklist". A typical scenario could be to populate and Address Group Object that is associated to an Access Rule to deny network traffic. The following API calls can be utilized with cURL tool. Please replace the IP address and username/password per your config.

Authentication

curl -k -i -u myuser:mypassword -digest -X HEAD https://192.168.168.168/api/sonicos/auth
Starting the firewall management

curl --insecure -X POST "https://192.168.168.168/api/sonicos/start-management"
Changing the firewall to Config Mode

curl --insecure -X POST "https://192.168.168.168/api/sonicos/config-mode"
Modify Address Object named "AO-Test" with IP address "10.10.10.10" and UUID "00000000-0000-001d-0100-2cb8ed9d8020" to "10.10.10.99"

curl --insecure -X PUT "https://192.168.168.168/api/sonicos/address-objects/ipv4" -H "accept: application/json" -H "Content-Type: application/json" -d "{\"address_objects\": [{ \"ipv4\": { \"name\": \"AO-Test\", \"uuid\": \"00000000-0000-001d-0100-2cb8ed9d8020\", \"zone\": \"LAN\", \"host\": {\"ip\": \"10.10.10.99\"}}}]}
Committing the change

curl --insecure -X POST "https://192.168.168.168/api/sonicos/config/pending" -H "accept: application/json" -H "Content-Type: application/json" -d "{}"

Resolution for SonicOS 6.5

This release includes significant user interface changes and many new features that are different from the SonicOS 6.2 and earlier firmware. The below resolution is for customers using SonicOS 6.5 firmware.

The following steps should be completed first to be able to use the API.

SonicOS API enabled on Manage | Appliance | Base Settings
"Enable RFC-2617 HTTP Basic Access authentication" option selected on the same page
A user created that is part of "SonicWall Administrators" group
HTTPS "User Login" option enabled on the respective interface, which will be used for API calls

In this use case we will create Address Objects and add them to a Address Group Object named "Blacklist". A typical scenario could be to populate and Address Group Object that is associated to an Access Rule to deny network traffic. The following API calls can be utilized with cURL tool. Please replace the IP address and username/password per your config.

Authentication

curl -k -i -u myuser:mypassword -digest -X HEAD https://192.168.168.168/api/sonicos/auth
Modify Address Object named "AO-Test" with IP address "10.10.10.10" and UUID "00000000-0000-001d-0100-2cb8ed9d8020" to "10.10.10.99"

curl --insecure -X PUT "https://192.168.168.168/api/sonicos/address-objects/ipv4" -H "accept: application/json" -H "Content-Type: application/json" -d "{\"address_objects\": [{ \"ipv4\": { \"name\": \"AO-Test\", \"uuid\": \"00000000-0000-001d-0100-2cb8ed9d8020\", \"zone\": \"LAN\", \"host\": {\"ip\": \"10.10.10.99\"}}}]}
Committing the change

curl --insecure -X POST "https://192.168.168.168/api/sonicos/config/pending" -H "accept: application/json" -H "Content-Type: application/json" -d "{}"

Not Finding Your Answers?

ASK THE COMMUNITY

Was This Article Helpful?

YES NO

Modifying Address Object via SonicOS API call using cURL

Description

Resolution

Resolution for SonicOS 7.X

Resolution for SonicOS 6.5

Related Articles

Categories

Not Finding Your Answers?

Was This Article Helpful?

Article Helpful Form

Article Not Helpful Form

Follow Us

Subscribe to newsletter

Stay In Touch