How to export switch configuration using CLi ?

This article will help you to export the switch configuration to a text file using a  terminal emulation application.

1. Launch any terminal emulation application that communicates to the appliance (PuTTY, TeraTerm Pro,SecureCRT, HyperTerminal, etc.) and configure the following settings.
   
   NOTE: The configuration may differ for other applications; the demonstration below is based on the Terminal enumerator software "PuTTY."
   
   
2. Please enter the Host name (IP address) and Port number to establish a connection.
   
   
   
   
   
   
3. When the connection is established, log in to the security appliance using the credentials.
   
   
   
4. Please enter the following command to turn-off the cli pagination .
   
   
   
   
   
   
5. Please enter the below command to show the current configuration on the switch.
   
   Show current running-config
   
   
   
   
   
6. The location specified on Step 1 will contain a TXT file with the switch's current configuration.