Support on SonicWall Products, Services and Solutions
Browse Knowledgebase by Category
How to enable scheduled TSR generation on SRA appliance
12/20/2019 9 10888
This article describes how to enable scheduled TSR generation on SRA appliance.
- Access SRA but instead of "management" it should have "diag" (for example when device has an IP address 192.168.5.101 go to https://192.168.5.101/cgi-bin/diag).
- Then click on "Internal Settings". The SRA appliance will need to be restarted.
- Scheduled TSR generation could also be set up in System | Diagnostics on the SRA interface.
There is also an option available to generate TSR on each restart of SRA unit.
How to test:
After some time go to System | Diagnostics and check if any TSR has been generated.
TSR reports could be also sent to email address but it needs to be configured in Log | Settings page first.
NOTE: You can set up TSR generation daily or hourly. SRA unit will save last 12 TSR reports.