How to connect SonicWave with PoE Injector?

How to connect SonicWave with PoE Injector?

Feature

This article explains how to connect SonicWave to SonicWall Security Appliance using PoE Injector.
See Product safety and regulatory information.

Procedure

Connecting SonicWave using PoE Injector

If your deployment uses a SonicWall PoE injector, read and comply with instructions provided with the PoE first, then complete the following steps:

1. Plug the power cord of the SonicWall PoE injector into the power outlet.
2. Using Ethernet cable (not included), connect the Data in port on the SonicWall PoE Injector to the WLAN zone interface of SonicWall that you created earlier.
3. Using Ethernet cable, connect the Data and Power out port on the SonicWall PoE injector to the LAN port on the back of your SonicWave.
4. Wait for the link LED to illuminate. This indicates an active connection. It takes approximately one minute for the SonicWall security appliance to auto-provision.

NOTE: For third party PoE devices, please follow the manufacturer's instructions