How to configure the packet monitor to send the captured packets to FileZilla FTP server

On the File Zilla Server Interface, Click on User group and add a user group with a friendly name.

E.g. Here i named it as Packet captures

Once User group is added, create a new user by clicking on user icon as shown below.Add a test user and use any friendly name and select  the relevant user group.

Once user is created enable the account and set the password for that user as below.

Create a new folder in My Documents as SonicWall Packet captures and Sub folder as captures and share that folder to that user which we created above.

Make sure that you have given read and write options for that user to access the files.
 

TIP: Make sure to select the path as home directory

---

Step 2: Configuration of Packet Capture in SonicWall

RESOLUTION FOR SONICOS 7.X

This release includes significant user interface changes and many new features that are different from the SonicOS 6.5 and earlier firmware. The below resolution is for customers using SonicOS 7.X firmware.

 

• On the SonicWall navigate to System | Packet Monitor or Dashboard | Packet Monitor
• Click on configure, on the monitor filter go with your requirement IP type as TCP,UDP and with respective source or destination ip address or port numbers.
• On Logging tab, Enter the FTP server address,Login ID,Password and Directory Path.
  
• Ensure that you have enabled Log to FTP Server Automatically and Log HTML File Along with .cap File and then click on OK.
  
  

• Start the Capture so that SonicWall will capture the packet and then will dump into the FTP server Automatically.
• If you login to FileZilla Server Interface will see that captures are dump into it automatically.
  
  

• If we navigate to the directory or the folder that been specified on the machine, we can see the packet captures and can analyze it according to our needs.