Support on SonicWall Products, Services and Solutions
Browse Knowledgebase by Category
How to capture GVC adapter with WireShark
03/26/2020 26 13431
This article describes how to capture packets sent via GVC using WireShark on a Microsoft Windows machine.
Step 1: Go to Start, right click Computer and select Manage.
Step 2: Select Device Manager.
Step 3: Select View | Show Hidden Devices.
Step 4: Click on the small arrow next to Non-Plug and Play Drivers.
Step 5: Right click on NetGroup Packet Filter Driver and select Properties.
Step 6: Change the Startup settings to System on the Driver tab.
Step 7: Reboot your PC and relaunch GVC.
After GVC has started you should see the GVC adapter in WireShark.