Support on SonicWall Products, Services and Solutions
Browse Knowledgebase by Category
HDD shows 100 in AMC console hence unable to save the configuration and webproxy server fails
03/26/2020 2 8654
HDD shows 100 in AMC console hence unable to save the configuration and webproxy server fails and unable to save the configuration due to no space left on root partition.
Appliance AMC shows 100 disk uaage once in few days, at that time we're unable to save changes any configurations and I did notice web proxy service fails.
If we reboot manully appliance works properly however HDD actual space utilization was up to 30-40
Here is the command to check the disk space utilized on the appliance.
AventailSSLVPN:~# df -h
Filesystem Size Used Avail Use Mounted on
/dev/root 5.0G 5.0G 0 100 /
tmpfs 787M 88K 787M 1 /run
tmpfs 5.0M 0 5.0M 0 /run/lock
tmpfs 3.2G 4.0K 3.2G 1 /run/shm
/dev/sdb3 126G 14G 106G 12 /var/log
/dev/sdb5 1012M 34M 927M 4 /upgrade
/dev/sda1 1.9G 368M 1.4G 21 /cf
We can see 100 HDD with the above output..
The main cause of this is its due to AAR Advanced Reporting Tool was enabled in AMC console hence it was using HDD space in /var/tmp folder.
***Snippet of logs***
--- //depot/Firmware/EXSeriesVPN/lhotse/12.0.1/src/avt/reporting/appfs/usr/local/aventail/bin/aarpushlogs 2016-12-28 15:41:54.000000000 -0800
+++ /Users/wmperry/Documents/Source/lhotse/12.0.1/src/avt/reporting/appfs/usr/local/aventail/bin/aarpushlogs 2016-12-28 15:41:54.000000000 -0800
This issue has been fixed with our latest hotfixes.
Make sure to apply the Pform-hotfix-11.4.0-726.bin & Clt-hotfix-11.4.0-726.bin, we can download this hotfix from www.mysonicwall.com