Explanation of Drop code and Module-ID values for 6.1 firmware and below
12/20/2019 1059 20670
Explanation of Drop code and Module-ID Values in Packet Capture Output
When viewing output on the System | Packet Capture page, there are two fields that display potentially useful diagnostic information in numeric format. The Module-ID field provides information on the specific area of the firewall (UTM) appliance's firmware that handled a particular packet. The Drop-Code field provides a reason why the appliance dropped a particular packet. .
NOTE: Click on the Firmware version to view the Drop-Code details.
NOTE: Drop code numbers may change based on the firmware version, however, the drop code message (description) remains the same.
Additional drop code articles:
Gen6 - SonicOS Enhanced 6.2.x
NOTE: All 6.2 firmware and newer contain the drop codes and descriptions within the packet capture utility. Find this by going to the packet capture located under System | Packet Monitor.
Gen6 - SonicOS Enhanced 6.1.x
Gen5 - SonicOS Enhanced 5.9.x
Gen5 - SonicOS Enhanced 5.8.1.x