Enable SSH on Standalone SMA1000 series Hardware & Virtual Appliance.

1. In the AMC, navigate to System Configuration | Services.

2. In the Network Services section, click the Configure link under SSH.

3. To enable SSH, select the Enable SSH checkbox.

4. To add a host from which you want to enable SSH access, click + icon, type the IP address and subnet mask for the host you want to add, and then click OK (Always remember or save a screenshot of the subnet added).

5. To add a authorized key for users that you want to allow to access the appliance without a password, click + icon, paste the public SSH key, and then click OK.

6. Click Save and apply pending changes.

1. Select the checkbox to left of any hosts you want to remove.

2. Click Delete icon, and then click Save.