Enable Radius authentication with a Cloud Managed SonicWave

This KB provides information on the creation of network connection and SSID policies to enable Radius authentication.

In this example we are going to use Microsoft Server 2019.  The following items will be required

• Connection Request Policy
• Network Policy
• Radius Client Details

1. Add a Radius Client
   
   
   
   
   
   
   
2. Click Next
   
   
3. Add a Radius Client
   
   
   
   
   
   
4. Click OK once the details have been entered
   
   
5. Click Next
   
   
6. Choose the Authentication Method and click next
   
   
   
   
7. Add the Radius User Group
   
   
   
   
   
   
8. Click next
   
   
9. The configuration of traffic control attributes will not be covered in this KB.  Click Next
10. The configuration should show the 3 required components
    
    
    
    
    
    
    
    
    SSID configuration via the Wireless Network Manager
    
    
11. Log in to the Wireless Network Manager
    
    
12. Go to the SSID Policies section
    
    
    
    
13. Choose the SSID policy or create a new one and enter the authentication and Radius Details
    
    
    
    You should then seen the SSID appear under the list of available networks
    
    
    
    
    
    
    
    
    
    
    You may have to add the network manually if there are problems connecting
    
    
    
    
    
    Once connected you should see the following connection information under the Wireless Network properties