CSE Getting Started: Deploy A Standalone Connector

09/24/2024 4 People found this article helpful 59,253 Views

Description

When using SonicWall Cloud Secure Edge (CSE) you're likely to use two architectures. The most common being Global Edge where you ingress into your on-prem resources using a dial-out Connector which establishes a secure tunnel to the Global Edge AccessTiers.

The Connector will then receive traffic from the AccessTiers which have passed the configured policy checks for their respective service and route it to the appropriate backend address.

Follow the guide below to configure the Connector on a standalone server. The examples provided by this article will use Ubuntu and aims to provide general guidance. If you are looking for step-by-step instructions for your particular Platform or OS, please refer to the Related Articles section below.

Requirements:

Supported host for Connector
Elevated Access to the desired host

Resolution

Start by navigating to the SonicWall CSE Command Center and log in.

On the SonicWall CSE Command Center, go to Networks|Connectors and choose Create Connector
Once clicked, this will bring you to the initial configuration page for the Connector. Fill out the following fields and click Continue.
The remaining fields are for more advanced configurations which may not apply to your environment. If you would like to learn more, please visit the Related Article section.
1. Connector Name
2. Description
Now the Command Center will supply with installation options. Please choose the Server Environment and Installation Method which best suits your needs.
Once you select your Server Environment & Installation Method, scroll down to find the Pre-requirement Checklist and Installation Steps. In this article, we will use an Ubuntu 22.04 LTS Server as an example. Read through the Pre-requirement checklist and perform any necessary actions to complete it. This ensures your Connector will be able to function as intended within your networking rules and segment.
Now follow the "Installation Steps" by entering each command into the CLI of the server. You may copy and paste each one as they are pre-configured for your Connector.

Steps 1 & 2 - Download & Configuration:

Step 3 - Installation:
Once the service shows on your server as running, swap to the Command Center. Then when Connector begins reporting, the "Continue" button at the bottom will light up and become clickable. Please click "Continue" once available.

Validation

Part 2 of this guide series will go over registering the CSE Desktop App which will validate the work we have done here. If you hit an error in Part 2, please ensure the steps in this guide were followed.

Once completing Step 6 above. You will be redirected to the Connector Overview page showing your connector as "Reporting". If you are not able to get to this step or the Connector is not reporting. Please ensure steps 3-5 of this article have been completed in full. A "Reporting" status is the validation of steps in this article.

Next Steps

In Part Four, we will go through making your first role. This role will mapped with the user groups that CSE retrieved during the validation. In the background, your identity provider sent the user groups associated with your user to SonicWall's Cloud Secure Edge.

CSE Getting Started Part Four: Create A Role

Related Articles

Not Finding Your Answers?

ASK THE COMMUNITY

Was This Article Helpful?

YES NO

CSE Getting Started: Deploy A Standalone Connector

Description

Resolution

Related Articles

Categories

Not Finding Your Answers?

Was This Article Helpful?

Article Helpful Form

Article Not Helpful Form

Follow Us

Subscribe to newsletter

Stay In Touch