SonicWall TZ400 Wireless (TZ400W) out of box
Description
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsGy.gif)
NOTE: Video Link: SonicWall TZ400 Wireless (TZ400W) Out of Box Video.
The SonicWall TZ400 Wireless package includes the following
- SonicWall TZ400 Wireless appliance
- 3 Antennas
- One Ethernet Cable
- One Power Adapter
- One Power Cord
- Quick Start Guide
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsH2.png)
NOTE: The included power cord is approved for use only in specific countries and regions. Before using a power cord, verify that it is rated and approved for use in your location.
Front and Back Views of the SonicWall TZ400W
SonicWall TZ400W Port Descriptions-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHb.png)
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHG.png)
Cabling the SonicWall TZ400W as a Network Gateway-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHY.png)
- Locate the SonicWall ports X0 and X1, port X0 is also label as LAN and port X1 is also label as WAN.
- Connect your Internet access device such as a cable or DSL modem to SonicWall WAN (X1 port).
- Connect SonicWall LAN (X0 port) to your laptop or PC or to a Network Switch that to which your network devices such as PCs, game consoles, Smart TVs, etc are connected.
- Other ports such as X2, X3 … can be assign to other networks.
Cabling Topologies
- Option 1
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHI.png)
- Option 2
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHd.png)
Power On SonicWall TZ400W
- Plug the power cable into an appropriate power outlet (110 - 240 volts).
- Appliance powers on and the orange LED blinks during the boot sequence. This process may take up to 2 minutes.
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHC.png)
Access the SonicWall Admin User Interface
- Connect a PC to the SonicWall LAN (X0) interface or a network switch connected to the LAN interface. You will automatically receive an IP address from the SonicWall appliance.
- Open a browser to https://192.168.168.168 for access to the SonicWall.
SonicWall TZ400W First time setup
Setup Wizard walk through
- For the first time access as the admin user, you will be offered a choice to use a Setup Wizard or go directly to the SonicWall management Interface.
- At the Setup Wizard Launch Page, click the Setup Wizard link here.
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsH1.png)
At the Setup Wizard Welcome Page
- Click Next.
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHE.png)
At the Admin Credentials page
The Admin default login credentials are
- Username: admin
- Password: password
NOTE: Update the password for the admin user. This is recommended to keep the admin user secure.
- Click Next
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHX.png)
IP Configuration page
- The WAN Interface will detect for a DHCP server to retrieve its IP configurations.
- If no DHCP server is detected or if you wish to enter static IP parameters then click on the link Manual Config.
- Click Next.
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsHa.png)
IP Configuration success page
- The IP configuration for the WAN interface is complete and the Setup Wizard is done.
- Click Done.
-out-of-box-kA1VN0000000FyN0AU-0EMVN00000EnsH0.png)