Configuring Access for Users to Limited Management Capabilities of SonicWall Firewall (UTM) Applian

Configuring Access for Users to Limited Management Capabilities of SonicWall Firewall (UTM) Appliances

p { margin:0in;margin-bottom:.0001pt;} You can restrict a user to limited access to the SonicWall Management interface. The access is limited to the following pages:

 

Firmware 6.x:

• General - Status, Network, Time
• Log - View Log, Log Settings, Log Reports
• Tools - Restart, Diagnostics minus Tech Support Report.

SonicOS Standard:

• System - Status, Time, Diagnostics, Restart
• Network - Settings, ARP
• Wireless - Status, Settings
• Log - Reports, Name Resolution, Automation, Syslog, Categories, View

SonicOS Enhanced:

• System - Status, Time, Diagnostics, Restart
• Network - Interfaces, DNS, ARP
• Wireless - Status, Settings
• SonicPoint - IDS, Station Status, SonicPoints
• Users - Guest Status, Guest Accounts, Guest Services
• Log - Reports, Name Resolution, Automation, Syslog, Categories, View

Follow these instructions to enable limited management capabilities:

• Firmware 6.x:
  
  Enable the "Limited Management Capabilities" check box on the Access>Users page.
• SonicOS Standard:
  
  Enable the "Limited Management Capabilities" check box on the Users > Local Users > Add User page (or select configure for an existing user)
• SonicOS Enhanced:
  
  Click Users > Local Users > Add User. Once you add the user, select the Group tab and add the User to the Limited Administrators group. Click OK.