Multiple Routes with One Byte Data in DHCP option 121 (Classless Static Route Option)
Description
Resolution
STEP 1: Create Option Object
Go to Network > DHCP Server screen,
-kA1VN0000000EZK0A2-0EMVN00000EnvV6.png)
Step 2: Now, click on Advanced,
-kA1VN0000000EZK0A2-0EMVN00000EnvUz.png)
Step 3: Click DHCP Generic Option drop down Menu and select "Create New DHCP Option Object"
-kA1VN0000000EZK0A2-0EMVN00000EnvUx.png)
Step 4: Now, you have to fill up all the necessary fields,
OPTION NAME is the name of the object, OPTION NUMBER chosen is "DHCP Option 121" with OPTION ARRAY check-box "ENABLED" and OPTION TYPE set as "ONE BYTE DATA".
Example: You have to Add two Routes:
1)Network is 10.56.0.0/16 and Gateway is 10.10.5.253 and
2)Network is 10.58.0.0/16 and Gateway is 10.10.5.253
-kA1VN0000000EZK0A2-0EMVN00000EnvUv.png)
Now the syntax that we have to use in this scenario goes as follows:
16;10;56;10;10;5;253;
16;10;58;10;10;5;253
OR
16;10;56;10;10;5;253;16;10;58;10;10;5;253
*It might form a continuous line but keep them separated by ";" (semi-colons), but separate each Route with a SPACE/ENTER.
-kA1VN0000000EZK0A2-0EMVN00000EnvUw.png)
In order to Verify the same, you can run a packet capture on WIRESHARK and the results should be as follows:
-kA1VN0000000EZK0A2-0EMVN00000EnvV5.png)