SMB SSL-VPN: Upgrading firmware on SMA 500v Virtual Appliance

02/02/2021 41 People found this article helpful 101,929 Views

Download

Print

Share

• LinkedIn
• Twitter
• Facebook
• Email
• Copy URL The link has been copied to clipboard

Description

To update the firmware on your new SMA 500v Virtual Appliance:

1. In MySonicWall, navigate to  Resources & SUpport |Download Center page, select SMA 500v firmware in the Software Type dropdown list.
2. Click the desired firmware link and save the .sig file to your local computer.
3. Log into your SMA 500v Virtual Appliance, and navigate to the System | Settings page.
4. Select Upload New Firmware and browse to the location where you saved the firmware image file,
5. Select the file, and click the Upload button.
6. Do one of the following:

• To boot the new firmware with current configuration settings, click the boot icon for New Firmware.
• To boot the new firmware with factory default settings, click the boot icon for New Firmware and select Boot with factory default settings.

Related Articles

• SMA100: NetExtender support for Windows ARM-based processors is not available on Windows platforms, use Mobile Connect until Ver-10.2.2 Release
• SMA100 Series: Maximum number of Un-authenticated Connections that each of the Product Supports.
• Configuring Device Management based on Device ID for SMA 100

Categories

• Secure Mobile Access > SMA 100 Series