802.11a/g/b Wireless Settings

When the Radio Mode is set to 802.11a only, 802.11g/b mixed, or 802.11g only, configure the following options:

Channel	The channel the access point uses for communication. By default, the channel is set to Auto. This allows the appliance to automatically detect and set the optimal channel for wireless operation based on signal strength and integrity. You can select a single channel within the range of your regulatory domain. Selecting a specific channel can also help the appliance avoid interference with other wireless networks in the area.
Enable WDS AP	Allows the WDS client to connect to this access point.
SSID	Is filled with a default value of sonicwall- plus the last four characters of BSSID; for example, sonicwall-C587. The SSID can be changed to any alphanumeric value with a maximum of 32 characters.