SMTP Settings

The Access Points and Switches Management now supports integration with external email servers and provides users with the option to configure their own email server for receiving reports and notifications.

The General > SMTP Settings tab, has two sections

• SMTP Configuration Settings

• SMTP Configuration Test

To configure external email server

1. Navigate to Settings > General > SMTP Settings tab.

2. In the SMTP Configuration Setting section, enable the toggle Enable External Email Server Integration.

3. Enter Mail Server's Name or IP Address.

4. Enter from E-mail address.

5. Enable the toggle Advanced Settings, to the bring up additional settings.

   1. Enable the toggle Skip TLS Cert Verification.

   2. Enter SMTP Port value.

   3. Select the security method from the Connection Security Method drop-down list.

   4. Select the authentication type from the Authentication Type drop-down list.

   5. Enter the username in the Username field.

   6. Enter the password in the Password field.

6. Click on Save, to save the changes.

To Test the external email server configuration

1. Navigate to Settings > General > SMTP Settings tab.

2. Configure the external email server in the SMTP Configuration Setting section.

3. In the SMTP Configuration Test section, enter the E-mail address to which an test notification can be sent.

4. Click on Test Settings.

   If the test is successful, then there will be a success message as shown below