This version of SonicOS 7.2.1 is a feature release for existing platforms and also resolves issues found in previous releases.
If managing your SonicWall firewalls using Network Security Manager (NSM), do not upgrade your firewalls to SonicOS 7.2 until NSM 3.0 becomes available.
The platform-specific version for this unified release is the same:
| Platform | Firmware Version |
|---|---|
| TZ Series | 7.2.1-7003 |
|
| Issue ID | Issue Description |
|---|---|
| GEN7-52794 | Overriding the MAC address on the W0 interface does not work. |
| Issue ID | Issue Description |
|---|---|
| GEN7-52544 | On the Access Point Monitor page, with a wireless client to connected to the Access Point, the client Allow and Deny buttons are always grayed-out even if the ACL function is enabled or disabled. |
| GEN7-52611 | NAT policy info in the Access Policy log is not shown in the log message when Flow Report is enabled. |
| GEN7-52723 | SAML references are shown in Tech Support Report (TSR) when running in Policy Mode even though it is not supported. |
| GEN7-52894 | An interface that is part of a custom zone with a name that contains special characters shows the zone and mode as being unassigned. |
| GEN7-52995 | The User session option Open user's login status window in the same window rather than in a popup does not work for a SAML user if accessing the HTTPS URL directly. |
| GEN7-53036 | The Global VPN Client (GVC) fails to connect when using the NETBIOS format "Domain\username" to connect with the Authentication Partition Domain. |
| GEN7-53118 |
For SAML configuration and downloading the XML metadata from an Identity Provider, and then importing this XML file to the firewall, the,firewall will display: Restart Required!. After clicking the Restart button , only the Identity Provide certificate is saved; the IDP configuration will not be saved. Save the firewall configuration before restarting the firewall. |
| GEN7-53128 |
The Redirect Authentication page may Intermittently not display when using SAML with One Login or GSuite IDP when DPI-SSL is enabled. Exclude the SAML IDP domains in the DPI-SSL Common Name exclusion list. |