How to Change an Interface IP using CLI

How to change an interface IP using Command Line Interface.

Log into the appliance using a terminal software like puTTY

1. Type: config (hit enter)

-----------config(C0EAE4009930)#

1. Type: interface and name of the interface e.g. X3  (hit enter)

1. Type: ip-assignment WAN static   (in our case the IP assignment should be static and the interface should be WAN ... hit enter)

1. Type: ip 60.60.60.60 netmask 255.255.255.0 (hit enter)
2. Type: commit  (hit enter)

type: exit  (hit enter)