How can I configure a BGP Route based vpn between SonicWall and AWS ?

The following networks will be used for demonstration purposes during this article. Your networks may be different.

 AWS  Resources

1. LAN subnet: 10.50.30.0/24
2. Public IP: 13.237.76.27

SonicWall  Resources

1. LAN subnet: 10.13.1.0/24
2. Public IP: 40.74.74.168
3. BGP Local ASN 65000
4. BGP REMOTE ASN 64512
5. BGP PEER IP 169.254.116.78
6. TUNNEL INTERFACE IP 169.254.116.77

1. Login to the AWS portal at https://aws.amazon.com.
2. Create Virtual Private Gateway and associate it with the VPC .
   
   
3. Create Customer Gateway  with routing as Dynamic and remote end Public ip address .
   
   
4. Create VPN connection and define Virtual Private gateway and Customer Gateway and (Download Configuration ) to be used on SonicWall.
   
   

SonicWall Configuration

1. Login to the SonicWall firewall.
2. Navigate to the VPN policy tab. We're using the latest SonicOS 6.5 firmware. Navigate to Manage | VPN | Base Settings. Click Add to create a new VPN policy.
3. Give the VPN policy a name. We'll use the following settings.
   
   
   • Policy Type: Tunnel Interface
   • Authentication Method: IKE using Preshared Secret.
4. Click the Proposals tab and use default IKEV2 proposals.
   
   
   
   
5. Create Tunnel Interface, navigate to Network | Interfaces.
   
   
   
6. Enable Advance routing Under Network | Routing | Settings, Configure BGP using CLI.
   
   admin@0040103538F8> config t
config(0040103538F8)# routing
(config-routing)# bgp
 ARS BGP>router bgp 65000
 neighbor 169.254.116.78 remote-as 64512
 network 10.13.1.0 mask 255.255.255.0