Access Points and Switches Management Administration Guide
Table of Contents
Link Layer Discovery Protocol
The following fields are displayed in this section:
- LLDP Enable: Toggle to enable or disable the protocol.
- Transmit Interval (seconds): The default value is 30. The range is from 5 to 32767.
- Hold (seconds): The default is 4. The range is from 2 to10.
- Reinit Delay (seconds): The default is 2. The range is from 1 to 10.
- Transmit (seconds): The default is 2 seconds. The range is 1 to 8191 seconds.
- Version: The default version is 2.
