Add VLAN Objects

To add a new VLAN

1. Navigate to Objects > VLAN Objects.

2. Click Add (+). The VLAN Config page displays.

   

3. Specify a group Name and VLAN ID.

4. Select a color.
5. Specify the DHCP Snooping status.

6. Select the Network tab and specify the following details:

   • Enable/Disable IPV4 Network

   • IP Address

   • Subnet Mask

7. Select the IGMP tab and specify the following details:

   • VLAN ID (the number range is from 1 to 4094)

   • Enable/Disable

   • Enable/Disable Fast Leave

   • Version of IGMP

   • Enable/Disable Quierier Interval

   • Interval (The range is 60-600)

   • Max Response Interval (The range is 0-25)

   • Startup Query Counter (The range is 2-5)

   • Startup Query Interval (The range is 15-150)

   • Static Ports (The range is 1-52)

   • Forbidden Ports (The range is 1-52)

8. Click OK to save the changes.