Scan Result

The Discovered APs > Scan Result tab allows you to authorize and acknowledge an Access Point.

The Scan Results table displays the information about Device,SSID, Threat Type, MAC Address, Radio,Channel,Authentication,Cipher, Vendor,Signal Strength and Max Rate.

To authorize an access point

1. Navigate to the Air Marshal > RF Survey page.
2. Click Discovered APs.
3. The Scan Result tab is displayed by default, listing the available Access Points.
4. Hover over an Unauthorized Access Points and click on the Authorize icon visible on the right side to authorize it.
5. In the Threat Type column, the access point now displays as Authorized.

To acknowledge an access point

1. Navigate to the Air Marshal > RF Survey page.
2. Click Discovered APs.
3. Click on the Scan Result tab to view the list of available access points.
4. Hover over an Unauthorized Access Points and click on the Acknowledge icon visible on the right side to acknowledge it.

Toolbar options

The toolbar above the table has the below options.

Option	Description
	Click on this icon to Refresh or reload the page.

To Filter Scan Result

Click the filter icon to view the available filters.